IMG_6116.jpg

TOP PIECE PINS

These pins are used for attaching P.U. toppieces to stiletto heels.

Produced with 4 different knurls, sizes to suit tube diameters. Specials are available on request

IMG_6124.jpg

OVAL HEAD BIFURCATED RIVET

Normally produced with .150" shank diameter (9g) in mild steel and plated to any specification.


Length range from 3/16" to 9/16" with short or standard slot.


Self-piercing, these rivets are used extensively in the Fibre-board, leather and plywood industries.

IMG_6197.jpg

OVAL HEAD 'DEEP-HOLE''THIN WALL' RIVET

Referred to as a 'Tubular Rivet'. Produced in all materials, this rivet is used extensively in the leather trade as a self-piercing. with no drilling necessary.

IMG_6199.jpg

COUNTERSUNK HEAD RIVET

Produced in all materials with any angle of countersunk to suit requirements.

This guarantees a flush finish with the component surface.  Solid, part-tubular and bifurcated are available.

IMG_6202.jpg

OVAL HEAD PART-TUBULAR RIVET

Referred to as P/T Rivet.  Produced in all materials and ranging in size from 0.072" dia. x 0.100" long to 0.250" dia. x 2" long.

Used in all industries where a permanent, neat fastening is required

IMG_6204.jpg

ROUND HEAD RIVET

Produced in all materials, the head form is usually for decorative purposes.  This rivet can be produced solid or part-tubular and plated to specification.

IMG_6120.jpg

PYRAMID HEAD RIVET

A part-tubular or tubular rivet.  Usually produced in mild steel with Nickel or Brass finish.  Often used as a decorative fastener in leather goods, especially jackets and dog collars.

IMG_6210.jpg

FLAT HEAD OR TINMAN HEAD RIVET

Produced in all materials, the head form is often required to fit a recess in the component.  This rivet can be produced solid, part-tubular or bifurcated.